NXG-Pro Desktop UPS


Product Overview

The NXG-Pro Desktop UPS offers a multi-functional, low cost battery backup for indoor applications. Designed to supply continuous commercial and standby power to 12VDC Customer Premise Equipment (CPE), the NXG-Pro Desktop UPS is rated for use with all CPE devices 12VDC 36 Watts (3 Amps) or less. With integrated ONT Reset Capabilities and Industry leading surge protection, The NXG-Pro Desktop UPS can be partnered throughout the home or small business to support one or multiple optical network terminals (ONT), optical network units (ONU), customer access points, wireless modems, routers, and embedded multimedia terminal adapters (eMTA). Designed for hours of battery backup during electrical outages, the NXG-Pro Desktop UPS also offers user replaceable 7.5AH SLA battery, audible and visual alarming, remote signal alarming (telemetry), and 3 year warranty.

SKU: PS1236DT-W Category:

Fiber-to-the-home (FTTH, FTTP, FTTx)

Customer Premise Equipment

VoIP Backup

Cable Modems (eMTA)

Portable Power

Multi-Dwelling Unit (MDU)

Single Family Unit (SFU)

Wireless Local Loop


Desktop or Wall-Mountable

Designed for "out-of-the-box" Desktop installation or option for wall-mounting

Surge Protection - VAC and VDC

Providing the Industry’s highest rated frontend surge protection, rated at 12KVA and providing the Industry’s only reverse surge protection on VDC output connection to offer a fully protected solution for any indoor deployment

Stationary or Portable Power

Install as stationary UPS or charge and use a portable battery power for off grid applications

User Replaceable Battery

Standard 12V 7.5AH Sealed Lead Acid Battery can be easily replaced without service interruption

Network Interface Reset (N.I.R.) Control Function

Allows End User options for push button control to reset VDC power to ONT or CPE device saving costly truck rolls to reset power

Telemetry Interface

Battery Signal Alarming to ONT or CPE device: On Battery, Replace Battery, Battery Missing, Low Battery

Local Visual and Audible Alarming

Onsite Battery Alarming: On Battery, Low Battery, and Replace Battery

Passthrough VAC Outlet

Integrated passthrough Vac Outlet so provide spare plug-in for additional CPE equipment

Request for Information

Technical Specifications

Input Voltage Range: 100Vac-240Vac

Frequency: 47-70Hz


Output Voltage (On Vac): 12 - 13.7Vac (includes charging voltage)

Output Voltage (On Battery): 12Vdc (Nominal)

Continuous Power Capacity: 36W


Battery Type: SLA Battery

Design Life: 5 years

Typical Recharge Time: < 20 hrs

Replaceable Pack: Yes


Lightning/Surge Protection: Yes (IEC 61000-4-5 2005 Level D)


Battery Auto-Charge: Yes

Battery Self-Test: Yes

Telemetry Interface: Yes

Local Alarming (Audible/Visual): Yes

Alarm Silence: Yes

ONT Reset: Yes

Cold Start: Yes


Maximum Dimensions: 6.8 x 3.2 x 7.3 (in)

Weight (with one battery pack): 7.16 (with battery)


Operating Temperature: -20C - 45C (-4F - 113F) at full power

Storage Temperature: -20 - 45C (-4F - 113F)

Technical Support

Request a Quote

480 Reasonover Drive, Franklin, KY 42134
P: (270) 813-1110
E: info@powertecsolutions.net